PaiCar 01 Heavy Cut Compound (Red)
New
$99.95
In Stock
A powerful, water-based, silicone-free heavy cut compound that truly removes heavy swirl marks, moderate scratches, oxidation and sanding marks (P1500–P2000) rather than masking them.
Add to Wishlist
Add to Wishlist
SKU:
CBOOG008D99CHARACTERISTICS
- Function: Heavy defect removal / paint correction (Step 1)
- Surfaces: New, aged or repainted automotive paint (properly cured)
- Formulation: Water-based, silicone-free, filler-free, dust-free
- Cut Level: 9/10
- Finish Level: 6/10
- Color: White, creamy
- Odour: Light and pleasant
KEY BENEFITS
- Removes heavy swirls, scratches, oxidation and P1500–P2000 sanding marks
- Silicone-free: defects are truly removed, not masked (body shop safe)
- Works with rotary, dual-action and gear-driven polishers
- Easy wipe-off for faster clean-up
SPECIFICATIONS
- Silicone Free: Yes
- Water Based: Yes
- Dust Free: Yes
- Storage Temperature: 5–30 °C
HOW TO USE
- Wash and decontaminate the surface (clay if needed). Dry completely.
- Shake well. Apply 3–4 drops to the pad and spread over the panel with the machine off.
- Start at the lowest speed and gradually increase (800–1500 RPM on a rotary). Work a 40 × 40 cm area with crosshatch passes and light pressure.
- After about 2 minutes, remove residue with a clean microfibre towel and inspect.
- Refine with PaiCar 02 or 03, then protect with a sealant or wax.
Recommended Pads: Microfibre or heavy-cut foam pad on a rotary for aggressive correction. Medium foam pad on a DA for a refined finish.
| Size | 1L |
|---|
